开荒程序
Procedures for opening up wasteland
1、首先清理现场留下的装修垃圾；
1. First, clean up the decoration waste left on the site;
2、由上到下全面吸尘；
2. Dust collection from top to bottom;
3、擦玻璃：先用毛巾把玻璃框擦拭干净，再用涂水器沾稀释后的玻璃水溶液，均匀的从上到下涂抹玻璃，有顽固的污渍用铲刀清除干净，再重复以上工序后用刮子从上到下刮干净，用干毛巾擦净框上留下的水痕，玻璃上水痕用报纸 擦拭干净。
3. Wipe the glass: first wipe the glass frame with a towel, and then dip the diluted glass water solution with the water applicator, and evenly smear the glass from top to bottom. If there are stubborn stains, clean them with a shovel. After repeating the above process, scrape it from top to bottom with a scraper, wipe the water marks on the frame with dry towel, and wipe the water marks on the glass with newspaper.
4、卫生间：坚持由上而下的原则，首先认清卫生间顶子的材质，是PVC的或是铝塑板还是涂料的，再根据不同的材质用不同的清洁方法进行清洁；用清洁球或是板刷清洗卫生间的墙壁，着重瓷砖的缝隙，和瓷砖表面上遗留的胶迹、涂料点、水泥渍等；用毛巾清洁卫生间的洁具，用不锈钢清洗液针对各种龙头、管件进行清洁；用洗地机对地面的地砖进行最后的清洁（木地板不能用洗地机），尤其是地面的边角，用清洁球和刀片对洗地机洗不到的角落进行针对性的除污、去除水泥渍等；最后，检查无遗漏后，再用干毛巾把水龙头等管件擦拭一遍。
4. Toilet: adhere to the principle of from top to bottom, first recognize the material of toilet top, is PVC or aluminum plastic board or coating, and then according to different materials, use different cleaning methods to clean; use cleaning ball or board brush to clean the wall of toilet, focus on the gap of ceramic tile, and the glue mark, paint spots, cement stains left on the surface of ceramic tile; clean sanitation with towel Clean all kinds of faucets and pipe fittings with stainless steel cleaning solution; clean the floor tiles on the floor with floor washer (floor washing machine is not allowed for wooden floor), especially for the corners of the floor. Clean the corners that cannot be washed by the floor washer with cleaning balls and blades. Finally, clean the faucet with dry towel after inspection Wait for the pipe to be wiped.